[. . . ] The installation location should not be exposed to direct sunlight and not placed near a heat source, e. [. . . ] If installation next to a heat source is unavoidable, use a suitable insulating plate or observe the following minimum distances from the heat source: ■ ■ Please fold out the illustrated last page. The floor of the installation location must not give way; if required, reinforce floor. Distance from wall When installing the appliance, ensure that the door can be opened by 90°. 2 When installing two appliances, ensure that the refrigerator is on the left and the freezer is on the right. Stick spacers in all four corners at a distance of 5 cm from the side edges to ensure a minimum gap between the appliances. Aligning the appliance Place the appliance in the designated location and align. 5 If available: Fit wall spacers to obtain the indicated energy absorption of the appliance. 26 sv Ställa skåpen bredvid varandra Bild 2 Se vid uppställning av två skåp till att kylskåpet ställs till vänster och frysskåpet till höger. [. . . ] 5 If available: Fit wall spacers to obtain the indicated energy absorption of the appliance. [. . . ]